JS waterproof coating

Detailed Product Description

Products Features:

1         Water-based environmentally friendly products ,can be used for the construction of drinking water pool water does not affect the drinking water standards .

2         Flexibility ,and strong anti-cracking , coating bridging capacity of more than 3mm ,suitable for dynamic waterproof.

3         Heat-resistant RCC (170 free flow phenomenon),weathering ,water ,alkali-resistant ,long life .A very good UV-resistant ,resistant to freezing and thawing capacity ,long-term exposure can be used in the roof.

4         Facilitate the construction of four cold ,waterproof

Layer seamless ,contoured base for the construction of the closure through walls of reliable performance without the potential of fire.

5         In the wet-surface construction , whether Yinshui Mian , dorsal surface can achieve a reliable water features.

6         Strong bond with the commonly used building materials ,and PVC pipe ,glass, aluminum,wood,ceramic tile ,polystyrene board ,asphalt ,brick ,tile ,sheet metal ,such as adhesive.

7         Degrees in low gentle 5∼40 within the framework of choice ,the application of different architectural climate zones.

 

Scope:

1 New roof ,waterproofing the external walls.

2 Underground waterproof projects.

3 Domestic hot water between the layers and Chuce.

4 Reservoir(Treasurer),sewage treatment and drinking water facilities waterproof.

5 Road and Bridge waterproof.

6 Non-waterproof cement concrete structure works.

    Operation key points:

                1 Primary treatment :the grass-roots level to be formed ,solid ,clean ,Kok Yin and Yang should be a circular type.

         2 Contact address : the drainage holes through walls of , the grid joints ,such as yin and yang Kok detail with 100~150 mm wide reinforced cloth in the mix of good soak in the slurry ,to strengthen paste.

         3 Weight ratio :JS--type solution :flour :water=10:10:0∼2

                JS-- type solution :flour :water=10:20:0.5∼3

         4 Stir in the powder barrel that ,by adding 1/3 emulsion ,a dedicated blender Slow Bancheng no lump of a paste ,add the remaining emulsion ,continue to stir evenly .According to fill the need adequate water.

         5 Tushua method: In accordance with a lower buttom→stiffened cloth→upper middle layers and the other completed . The time lag between the various floors of a former dry-non-stick coating ,is lower and middle classes ,the middle layer and should be strengthened for construction ,not spacing ,to enhance the level Putie straight ,non-fold ,the hollowing.

         6 Materials: the bottom 0.3kg/ , Surface 0.9 kg/ .Thickness of 1.4∼1.5mm.

      Specifications: The Executive JC/T894-2001

     

Items	Indexes
Solid content (%)≥	65
No treatment ,MPa ≥	1.2	1.8
Elongation at break%≥	200	80
Flexibility at low temperatures ,Radius 10mm	-10 ,no cracks	-
Water impermeability (0.3MPa,30min)	No water permeability